SEAGRANDPRIX660HS

• All surface contaminants such as dust, engine oil, grease, etc., must be removed.

• Must be used over suitable existing antifouling and liner.

• Check with CMP for suitability.

• Wash with clean water up to 250 bar (3500) to remove contaminants and extracted layers on existing antifouling.

• Color: Light Brown, Brown

• Flash Point: 25°C

• Volume solids % : 52 ±2 (ISO:3233(1998)

• VOC (Theoretical): 443 g/l.

Minimum Maximum

Film thickness, wet 144 288 µm

Film thickness, dry 75-150 µm

Spread Rate: (theoretical) 6.9 3.5 m²/l

• Mixing ratio: Base: 81 Hardener: 21 (by volume)

• Thinner: CR/ACRI THINNER A

• Minimum Temperature: -5 °C

• Surface temperature: Dew point + Minimum 3 °C

• Maximum humidity: Maximum 85% RH

• Application methods: Airless spray, brush, roller*

• For airless spray: Add base hardener while mixing. Mix well before use.

• Type No.: Graco 621 - 723

• Paint exit pressure: 11.7 - 14.7 MPa

• Slimming: 0-7% volume reduction

AC,BANNOH1500RZ,BANNOH500N,BANNOH500R. SILVAXSQ-K,CMP